Knowledge Category:  
DTV EasyColor Application Instructions
Last Updated: 04/18/2024
To get the best out of this application, follow the following settings and instructions to apply it to the garment.

Cutter Settings
  • Blade: 45° / Force: 5-10 / Offset: 250 / Speed: 10
  • Blade: 60° / Force: 5-10 / Offset: 350 / Speed: 10

Heat Press Instructions
  • Cover with a Heat Transfer Cover Sheet or Multipurpose Paper. Preheat garment for 2-3 seconds
  • Apply design at 310°F/154°C
  • Use medium pressure for 15 seconds
  • Peel carrier warm/hot
  • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

Washing
Wash the garment 24 hours after application and before wearing to ensure that any excess ink from the printing process is removed.Machine wash cold. Tumble dry on low. Do not dry clean. Liquid fabric softener not recommended.



Was this article helpful?

Comments:
 

Related Articles
 > Canon ImagePROGRAF TC-20 Manuals and Drivers
 > Siser Vinyl Application instructions
 > Siser Easysubli. How to Apply Sublimation on Color T-Shirts
 > Siser Easy Puff Application Instructions
 > Siser Easyweed Application Instructions
 > Siser Glitter, Sparkle, Twinkle HTV. What's The Difference?
 > Siser. The Tips, the Tricks, and the New - Glitter, Twinkle™, Sparkle™
 > Siser Brick 600. Decorating Caps with Siser® Brick 600.
 > Siser. A Guide to EasyPSV® Printable
 > Siser. EASY Two-Step Sublimation Process with EasySubli®